PVC SDR 35 Sewer Pipe

 

Kawsar Pipe's PVC SDR 35 and ASTM D3034 Gravity Sewer PVC product line is manufactured to meet the needs of residential waste water control, residential, commercial, industrial, and agricultural rain leader and storm runoff systems and other non-pressure applications. With top quality raw materials and modern processing technology, Kawsar Pipe's PVC SDR 35 & Solvent Weld ASTM D3034 Gravity Sewer pipe meets all industry standards in addition to our own rigorous quality control standards. Kawsar Pipe’sPVC SDR 35 & Solvent Weld ASTM D3034 Gravity Sewer pipe utilizes deep socket bells throughout the entire product offering. Kawsar Pipe produces Solvent Weld Gravity Sewer pipe in both solid wall and various perforated configurations. Whether specifying or installing our pipe you can be assured that Kawsar Pipe will provide the pipe with“Quality, Durability and Reliability for life time”

 

Product Specification

System PVC SDR 35 Sewer Pipe
Scope

This specification cover PVC Standard Dimension Ratio (SDR) 35 PSM pipe for gravity sewer and surface water applications with a pipe stiffness of 46. This product is intended for gravity applications where the operating temperature will not exceed 140°F.

Specification:

Pipe shall be manufactured from virgin rigid PVC (polyvinyl chloride) vinyl compounds with a cell class of 12364 as identified in ASTM D 1784. The requirements of this specification are intended to provide pipe suitable for non-pressure drainage and surface water.

 

PVC SDR 35 PSM pipe shall conform to ASTM D 3034 for gasket or solvent weld pipe with a minimum pipe stiffness of 46. Gaskets shall conform to ASTM F 477. The term “PSM” is not an acronym, but rather an arbitrary designation for a product having certain dimensions.

Installation shall comply with the latest installation instructions published by Kawsar Pipe and shall conform to all applicable plumbing, and building requirements. Buried pipe shall be installed in accordance with ASTM D 2321 and ASTM F 1668. Solvent cement joints shall be made in a two-step process with primer conforming to ASTM F 656 and solvent cement conforming to ASTM D 2564. The pipe shall be protected from chemical agents, plasticized vinyl products, or other aggressive chemical agents not compatible with PVC compounds. Systems shall be hydrostatically tested after installation. WARNING!Never test with or transport/store compressed air or gas in PVC pipe or fittings.

Reference Standards  
 
ASTM D 1784 Rigid Vinyl Compounds
ASTM D 3034 PVC Gravity Sewer Pipe (SDR) 35 PS 46
ASTM D 2855 Joints For Sewer Pipe Using Solvent Cement
ASTM D 2564 Solvent Cements for PVC Pipe and Fittings
ASTM D 2321 Underground Installation of Thermoplastic Pipe(non-pressure applications)
ASTM F 477 Elastomeric Seals (Gaskets) For Joining Plastic Pipe
ASTM F 656 Primers for PVC Pipe and Fittings
ASTM F 1668 Procedures for Buried Plastic Pipe

 

PVC SDR 35 PSM PIPE

  ASTM D 3034 & ASTM F 477
PVC SDR - 35 GASKETED – PS 46
Part No. NOM. SIZE LAYING LENGTH WT.PER 100 FT. (LBS.) AVG. OD (IN.) MIN.WALL (IN.)
S3D4W4 4”X13’ 13’-0” 110.4 4.215 0.12
S3D4W6 4”X20’ 20’-0” 109.7 4.215 0.12
S3D6W4 6”X13’ 13’-0” 249.6 6.275 0.18
S3D6W6 6”X20’ 20’-0” 247 6.275 0.18
S3D8W4 8”X13’ 13’-0” 451 8.4 0.24

Weight is a approximate and is for shipping purpose only.

PVC SDR - 35    SOLVENT WELD – PS 46
Part No. NOM. SIZE LAYING   LENGTH WT.PER                    100 FT. (LBS.) AVG. OD (IN.) MIN.WALL             (IN.)
S3W4W3 4”X10’ 10’-0” 112 4.215 0.12
S3W4W6 4”X20’ 20’-0” 109.7 4.215 0.12
S3W6W3 6”X10’ 10’-0” 252 6.275 0.18
S3W6W6 6”X20’ 20’-0” 246 6.275 0.18