PVC ASTM D2729 Sewer & Drain Pipe

Written by Super User. Posted in PVC Sewerage, Drain and Vantilization

Kawsar Pipe's Sewer & Drain ASTM D2729 PVC product line is manufactured to meet the needs of residential waste water control, residential, commercial, industrial, and agricultural rain leader and storm runoff systems, radon remediation and other non-pressure applications. With top quality raw materials and modern processing technology, Kawsar Pipe's Sewer & Drain ASTM D2729 pipe meets all industry standards in addition to our own rigorous quality control standards. Kawsar Pipe’s Sewer & Drain ASTM D2729 pipe utilizes deep socket bells throughout the entire product offering. Kawsar Pipe produces 3”, 4” and 6” diameter Sewer & Drain pipe in both solid wall and various perforated configurations. Whether specifying or installing our pipe you can be assured that Kawsar Pipe will provide the pipe with“Quality, Durability and Reliability for life time”

Product Specification

System PVC D 2729 Sewer and Drain Pipe
Scope

This specification covers PVC D 2729 Sewer Pipe for drainage applications. This pipe is intended for drainage applications where the operating temperature will not exceed 140°F

Specification:

Pipe shall be manufactured from virgin rigid PVC (polyvinyl chloride) vinyl compounds with a Cell Class of 12454 as identified in ASTM D 1784.

 

PVC D 2729 Sewer Pipe dimensions and physical properties shall conform to ASTM D 2729. All Pipes are manufactured in Pakistan.

Installation shall comply with the latest installation instructions published by Kawsar Pipe and shall conform to all applicable plumbing, building, and fire code requirements. Buried pipe shall be installed in accordance with ASTM 2321 and ASTM F 1668. Solvent cements joints shall be made in a two-step process with primer conforming to ASTM F 656 and solvent cement conforming to ASTM D 2564. The system shall be protected from chemical agents, fire stopping materials, thread sealant, plasticized vinyl products, or other aggressive chemical agents not compatible with PVC compounds. Systems shall be hydrostatically tested after installation. WARNING!Never test with or transport/store compressed air or gas in PVC or pipe or fittings.

Reference Standards  
 
ASTM D 1784 Rigid Vinyl Compounds
ASTM D 2729 PVC Gravity Sewer Pipe (SDR) 35 PS 46
ASTM D 2564 Joints For Sewer Pipe Using Solvent Cement
ASTM F 656 Solvent Cements for PVC Pipe and Fittings
ASTM D 2321 Underground Installation of Thermoplastic Pipe(non-pressure applications)
ASTM F 656 Elastomeric Seals (Gaskets) For Joining Plastic Pipe
ASTM F 1668 Primers for PVC Pipe and Fittings

Note:Latest revision of each standard applies.

 

 

 PVC ASTM D2729 Pipe